Geminis

Used Geminis lathe with 4 meters between centers
New in 2007 with CNC:FAGOR 8055 TC/C
SAUTER turret 300×300 with 4 positions
C axis and driven tools
Equipped with tools and accessories
Longitudinal chip conveyor
High pressure pump 6 Bar

Used CNC Lathe with 1200 swing over bed
New in 2012 with CNC Fagor 8055 TC
Main spindle bore Ø: 104 m.
Turret Sauter 320×320 4 positions
4 indenpendet jaw chuck  Ø 1.000 mm
Chip conveyor

CNC:Siemens 840 D Solution Line 19″
New in/Installed in: 2018/2019
Distance between centers :4.000 mm
Tailstock quill diameter: 220 mm
Internal Coolant
Chip Conveyor

Geminis reconstructed 5 meter between centres
New in 2006 CNC Fanuc 21i TB
C Axis and driven tools
Turret 8 Positions
Chip Conveyor
Include radial and axial live tool holders

Geminis GT7 CNC Lathe with 4 meters between centers
New in 2013. CNC Siemens.
Max Turning Diameter :1.600 mm.
Chip Conveyor
4 Support Steady Rest  Ø 900 mm
3 Support Steady Rest  Ø 500 mm
Equiped with Tool Holders

8-meter Geminis turning center
New in 2007 with CNC SIEMENS 810 D
Distance between centers: 8,000 mm.
4-position automatic turret
Longitudinal Chip Conveyor
Chuck 4 Independent Hard Jaws Ø 800 mm.

Distance Between Centres :4.000 mm
Swing Over Bed :2.200 mm
Speed Range: 24-240 rpm.
Nº Of Speeds :12   Speeds
Quill Ø :105 mm
Quill Tailstock: Ø 230 mm.

New in: 2001
CNC: Fagor 8055 TC
Chuck with 4 Indep. Hard Jaws Ø800 mm. : INCLUDED
Chuck with 3 Jaws Universal : INCLUDED
1 Steady Rest 3 Supports Ø 430 mm : INCLUDED
Chuck Protection : INCLUDED
Complete Rear Protection :  INCLUDED

Geminis CNC Lathe with C Axis and Driven Tools
FAGOR 8055 TC. YOM: 2003
Distance Between Centres: 5.000 mm.
SAUTER 12 POSITIONS VDI 60
Longitudinal Chip Conveyor: INCLUDED
2 Radial and 2 Axial Diven  Tool-Holders
Hydraulic Chuck 3 Jaws GALVEZ Ø 630.  Fix Steady Cap.300

Used CNC Lathe, Make Geminis Model GTH4 620×3000.
Year 2007. CNC Fanuc 21i TB.
FANUC Portable Handwheel.
Hydraulic Chuck Ø 300 mm.
Internal Coolant
High Pressure Pump 15 Bar.
Longitudinal Chip Conveyor.

Used CNC Lathe Geminis with 8 meter between centers.
New in 2006 witht CNC Fagor 8055TC.
Max. Swing Over Bed Ø: 1.000 mm.
Max. Swing Ø: 1.000 mm.
Max Swing Over Cross Slide Ø: 680 mm.
Distance Between Centres: 8.000 mm.

Second Hand Gemins CNC Lathe. 3 meter between centers. CNC Fagor 8055TC. New in 2006. Tailstock Diameter: 140 mm. Turret SAUTER 300×300 de 4 Positions. Chuck 4 Jails and Chuck Protection

Used CNC Lathe Geminis. Model GHT 4 720 X 4000. YOM 2002. CNC Siemens 810. 4 meters between centers

Used Parallel Lathe in Liquidation. Swing Over Bed: 1.200 mm. Swing Over Cross Slide: 960 mm., Swing in the Gap: 1.400 mm. Gap Length: 620 mm

Used CNC Lathe manufactured in year 2000 with CNC FAGOR 8050 TC. Max. Swing Over Bed Max. Ø: 720 mm. Max. Swing Ø: 720 mm. Max Swing Over Cross Slide Ø: 470 mm. Distance between Centres: 3.000 mm. Back Protection. 2 Handwhel in Carriage. Fix SteadyRest 50/400. Support Fix SteadyRest

Distance Between Centres: 3.000 mm. Swing Over Bed: 680 mm.Swing Over Cross Slide: 410 mm.. Swing in the Gap: 850 mm, Gap Length From Face: 310 mm
Width of Longitudinal Bed: 450 mm. Universal Chuck – 3 Jaws Ø 400. Rapid Traverse Cross Slide. Metric / Whitworth Tapping.