Vertical machining centre John Ford VMC 1600
Other available Vertical Machining Centers
Used Kondia B-1050 VMC
Second Hand Kondia VMC with Heindenhain TNC530 Table Surface: 1.200 x 500 mm. Travels (X/Y/Z): 1.000/500/610 mm. Chip conveyor ATC 22 Tools Internal
Second Hand DMG DMF-260
New in 2011 with CNC SIEMENS SINUMERIC 840D Table dimmesion: 2,900 x 700 mm. Travels (X/Y/Z) :2,600/700/700 mm ATC 3o Internal coolant 40 Bar / 600 l Longitudinal chip
Kondia A15
Used Kondia vertical machining center New in 2009 with HEIDENHAIN TNC 530 CNC Table Dimenssions: 1,550 x 700 mm. Travel (X/Y/Z axis): 1,500/700/700 mm. 40-tool ATC Internal coolant Chip
Used KONDIA A-10 VMC
Second Hand Kondia VMC New in 2006 CNC HEIDENHAIN 530 Table Surface :1.200 x 500 mm. Travels ( X/Y/Z) :1.000/500/610 mm. ATC 40 Tools Internal Coolant Chip
QUASER MV204CPL/12
Travels (X/Y/Z): 1,524/700/610 mm Table: 1,700 x 700 mm Taper: BT 40 BIG PLUS 30-position magazine 20 bar internal coolant 2 cross chip conveyor Longitudinal chip
GORATU G INNOVA 15
New in 2004 with FAGOR 8055 MC Table surface: 1,725×650 mm. Travels (X/Y/Z): 1,5007700/700 mm. Spindle speed 10,000 rpm 24-tool
Johnford SV41 with pallet changer
Johnford VMC with pallet changer New in 2007 with FANUC 18i MC.2 Table: 1,200 x 600 mm Travel (X / Y / Z) :1,050 / 610 / 610 mm 20-tool ATC Internal coolant 20 Bar 2 longitudinal and 1
Johnford SV41
Johnford 3+2 axis machining center New in 2007 with HEIDENHAIN iTNC 530 Table: 1,200 x 600 mm Travels (X / Y / Z) :1,050 / 610 / 610 mm 20-tool ATC Golden Sun CNCT 321 rotary table
Technical Features of this Second Hand VMC
| Table Surface | 1.800 X 750 mm |
| Longitudinal Traverse X Axis | 1.600 mm. |
| Transversal Traverse Y Axis | 850 mm |
| Vertical Traverse Z Axis | 710 mm. |
| Minimum and Maximum Distance over bed | 150 / 860 mm. |
| Rapid Traverse Axis (X,Y,Z) | 18.000 mm/min |
| Taper | BT-50 |
| Head Turning Speeds | 6.000 rpm. |
| Nº Ranges (ZF Gear Box) | 2 Ranges |
| Main Motor Power | 18,5 Kw. |
| Tools in Charger | 24 Tools |
| Table load capacity | 4600 Kg. |
| Rigid Tapping | INCLUDED |
| Internal Coolant Through Tool 24 Bar | INCLUDED |
| 4º Axis Installed | INCLUDED |
| 4º Axis NIKEN Ø 315 mm | INCLUDED |
| Control | FANUC 18 i MB |
| Machine Weight | 18.000 Kg. |
| Year Manufacture | 05/2005 |
| Machine Condition | GOOD |
Detailed information of this Second Hand VMC
This Used Vertical Machining Centre John Ford VMC 1600 with CNC Fanuc 18 i MB was built in May 2005. The vertical machining centre can be found in excellent status at the used machine tools warehouse that Maquinaria Colás owns in Zaragoza – Spain, totally reviewed and ready to be inspected and sent.
As additional equipment we highlight: 24 positions automatic tool changer, rigid tapping, fourth axis installation, internal coolant through 24 bar tool and 4th axis Nikon, diameter 315 milimetres.
ALL THE MACHINES ARE AVAILABLE SUBJECT TO PRIOR SALE
Technical specifications are not binding and may be modified without notice
